Support Center

A one-stop EMC test system for automotive components covering ESD, EFT/burst, surge, conducted/radiated immunity, power-frequency magnetic field, load-dump and power-fault testing.

Fluke provides online inspection and predictive-maintenance measurement solutions for industrial automation, enabling cost-effective operation in harsh production environments.

Using the VTECH VT321 to automatically test diodes, N-MOSFETs and NPN BJTs: VF/IR/VBR, Vth/RDS(on)/Igss, hFE, with automated reporting.

RIGOL provides oscilloscopes, arbitrary waveform generators and power analysis software for ECU design, in-vehicle networks, drive systems and sensor signal simulation.

Covers luminance, color, uniformity, viewing angle, transmittance/haze and photobiological safety measurement for phones, smartwatches and tablets, for both R&D labs and production lines.

Driven by the exponential growth in AI computing demand, data centers and AI servers are undergoing a fundamental architectural transformation. As the core computing engine, GPUs have evolved from consuming several hundred watts to several kilowatts, with peak currents approaching 1,000 A per device. This trend is reshaping server thermal design and power distribution strategies while redefining the performance requirements of the Voltage Regulator Module (VRM) located adjacent to the GPU.

Using the SDS7000A high-bandwidth oscilloscope for high-speed signal waveform testing, eye diagram measurement and signal integrity analysis.

An overall solution based on high-precision Source Measure Units (SMUs) for I-V/C-V testing of diodes, transistors, MOSFETs, optocouplers, memristors and other discrete devices.

Kewell's PCS test solution uses SiC design, supports multiple battery emulations on the DC side, and power quality & fault ride-through tests on the AC side.

LUXET provides comprehensive technical services including on-site repair, relocation, installation training, spare parts, documentation, and calibration/maintenance.

From bandwidth and attenuation ratio to loading effect and ground spring, learn how to choose the right probe.

Per GB/T 18655 / CISPR 25, a CYBERTEK EMI receiver plus current probes measure conducted/radiated disturbance on vehicle harnesses.

Trade off sample rate, measurement stability and channel cost; learn when to pick each DAQ-9600 module and how to speed up parameter setup, transfer latency and specific measurements.

A grid operator deployed nearly 150 Guide Sensmart thermal PTZs with a solar+4G wireless solution for 24/7 cable-terminal temperature monitoring and smart alarming.

For overheating defects in transmission and distribution equipment, infrared cameras detect real temperature distribution without powering down or touching live gear, quickly locating hazards.

Covers the top causes of PV-plant fires (hotspots, DC arcing, poor grounding, improper installation) and five daily inspection points: hotspots, insulation, grounding, voltage/current and power quality.

HIOKI offers complete electrical measurement for data-center UPS/battery maintenance, temperature monitoring, ground/insulation testing, and data acquisition.

The ZC5860 Loudspeaker Life Test System is purpose-built for reliability testing of loudspeakers or headphones, with built-in noise sources, digital filters, auto calibration and PC-based recording of current, voltage, impedance and power.

Integrated and intelligent end-of-line test solution for power battery packs, covering safety, insulation, BMS function, relay, temperature, and SOC tests.

Using the quadrant source-measure unit (SMU) to fully characterize a Si PIN photodiode: dark current, responsivity and breakdown voltage.

RIGOL oscilloscopes, high-voltage differential/current probes and UltraPowerAnalysis software cover power device loss, ripple and modulation analysis.

Fluke offers targeted temperature measurement, insulation testing, and process-control solutions across Li-ion battery R&D, manufacturing, and QC.

A complete solution for battery, OBC, motor/controller and charging-pile testing, built around PF-series power analyzers plus harmonic/flicker and power EMC compliance systems.

Three core values of oscilloscopes in power electronics testing: capturing dynamic transients, efficient fault diagnosis, and design optimization.

In recent days, high-voltage direct-grid-connected “ultra-fast charging” technologies have been deployed one after another. With a revolutionary design that allows direct connection to 10 kV / 35 kV medium-voltage grids and eliminates the need for traditional bulky transformers, this approach is rapidly becoming a mainstream pathway to achieve ultra-fast charging. By directly delivering DC output voltages of up to 800 V or even 1,000 V, it compresses electric vehicle charging time to the “minute level.”

Helps customers evaluate equipment performance and verify failure analysis feasibility through sample testing, accurately solving electrical failure localization for chips and electronic devices.

Following HKCI TM 1:2022, a Guide PT-II flagship thermal camera non-destructively scanned facades to precisely locate hollowing for targeted, minimally invasive repair.

A long-distance, non-contact, visual inspection workflow using an explosion-proof acoustic imager plus a smart thermal imager to catch partial discharge, micro gas leaks and abnormal heating early.

Built for million-scale 48V mild-hybrid production, compliant with ISO 21780 and GB/T 45120 and compatible with ISO 16750-2, VW 80000 and GMW 3172, using APS/PNS/CFS hardware and the AutoLab platform.

For building evaluation, maintenance, inspection and diagnostics: water leaks, insulation defects, underfloor heating, hollow walls, air-tightness and electrical faults.

To solve new-energy test pain points, CYBERTEK launched the TCP8102 high-frequency AC/DC current probe, HVP6000 high-voltage differential probe and TF1000D double-pulse tester.

HIOKI delivers measurement across PV/wind energy conversion, PCS, battery evaluation, grid power quality, and on-site maintenance.

Covers PIN, APD, SPAD and SiPM photodetector types and key parameters, and explains how PSS SMUs characterize dark current and breakdown voltage.

Differences between single-phase and three-phase AC power, and how to combine the ASR-2000/3000 single-phase AC+DC source with the ASR-002 three-phase controller for 1P3W/3P3W/3P4W outputs.

Conventional loudspeaker aging/life testers built from a signal source plus amplifier can no longer meet today's stricter quality requirements, and generally lack real-time monitoring and automatic open-circuit detection.

Radiated and high-frequency conducted disturbance testing per CISPR 16-1-4/16-2-3, with balanced/unbalanced VHF LISNs and supporting AMNs and antenna-method systems.

RIGOL combines time-domain and frequency-domain test solutions for IoT power optimization, battery life assessment and wireless integration.

Fluke focuses on PV, wind, and hydro power, providing process control for upstream materials plus power-plant O&M and inspection to extend plant life and raise efficiency.

Using an oscilloscope paired with a signal generator for Bode plot testing to analyze magnitude and phase response, ideal for power supply loop stability.

Detect metallic foreign matter and separator damage on cell lines via insulation resistance testing, with timing, method, and tester selection guidance.

With the rapid development of new energy vehicles and low-altitude economy technologies, hybrid energy systems combining lithium batteries and fuel cells—known as hydrogen-electric hybrid systems—are emerging as a key solution to enhance energy efficiency and extend operational endurance.

How fault injection modules test fault tolerance of BCM, BMS, motor controllers and OBC — fault configuration, timing, and verification under extreme temperature and EMC conditions.

Kewell's dedicated HVDC rectifier test solution monitors input/output voltage, current, power factor, and harmonics in real time, and accurately simulates load conditions and grid fluctuations.

A full suite for traditional and LED lamps: spectral/color/electrical performance, goniophotometry, accelerated aging/life, IEC62471 photobiological safety, flicker and EMC testing.

7×24 non-contact monitoring of equipment under high-temperature, high-pressure conditions: steam valves, tank level, flanges, warehouse fire protection, pipeline insulation.

An end-to-end toolkit for hot-season grid maintenance: thermal temperature screening, partial-discharge detection, insulation/grounding testing and power-quality analysis.

At its 2026 distributor conference, CYBERTEK launched 8 new products spanning smart passive high-voltage probes, fiber-isolated probes, AC/DC current calibrators and Rogowski coils.

A 4G dual-spectrum PTZ with wireless private network and solar power monitors transmission towers and cable terminals for temperature, video and micro-meteorology.

Determine first whether the relevant safety standard requires AC or DC test voltage. When both are allowed, manufacturers should understand the pros and cons of each test voltage.

Integrated testing from single chips and LED packages to Mini/Micro-LED displays: optical/color/electrical parameters, pixel-level uniformity, Gamma, viewing angle, transient behavior and crosstalk.

The MX300A automated test line provides a precise, stable platform for IGBT production line testing, covering loading, insulation, high/low temperature static/dynamic tests, and full dimensional inspection.

A complete solution for 2.5G/5G/10GBASE-T Ethernet interfaces in data centers, combining high-performance oscilloscopes, VNAs, waveform generators and compliance software.

RIGOL offers a complete EMI pre-compliance solution with scanning, peak testing, limit lines and multiple simultaneous CISPR detectors, covering radiated and conducted testing.

Thermographic inspection reveals the temperature distribution of distribution equipment, locating latent hazards on clamps, transformer tanks and transmission lines.

A Xi'an research institute used a Guide PT-series flagship thermal camera to non-contact record laser-heating temperature rise on 1 cm² crystals and analyze it in ThermoTools.

A fully automated production test solution for RF passive devices, covering auto loading/unloading, automatic testing, result judgment and material sorting.

CIQTEK combines SEM and FIB into a golden team for PCB process optimization, reliability verification and root-cause failure analysis.

The DB550 dual-beam FIB-SEM has been validated on real 5nm-node chips for production-ready TEM sample prep: intact fins, zero amorphization and sharply resolved film layers.

Addresses the pain point of many ports and low efficiency via a switch matrix that auto-switches channels, with one-click operation and one-time insertion for the whole assembly.

Designed for multipactor detection of high-power spaceborne components; it monitors amplitude/phase, noise, spectrum and S-parameter changes in real time and protects the system when multipactor occurs.

Addressing the pain points of multi-equipment setups, high adapter cost and low automation, the Ceyear 5233D BERT offers one-stop high-efficiency testing via direct interface boards.

HYPOWER addresses current-sensor frequency response, accuracy calibration, temperature rise, overload and di/dt tests with the HY-BPC-CT bipolar current source and HY-HPD precision DC supply.

Tektronix and Keithley offer wafer-to-system semiconductor test platforms spanning material, process, chip design and validation.

For EIS on fuel cells and large-current low-impedance cells, the HY-BPC-E bipolar current source extends current to ±1000 A alongside the electrochemical workstation.

End-to-end test solutions for EV traction inverters, batteries, in-vehicle networks, EMI/EMC and EVSE.

HYPOWER covers chip-, module- and system-level power semiconductor test with the HY-SMU source measure unit, HY-HV high-voltage DC supply and HY-BPC bipolar pulse current source.

Test, simulation and verification solutions for solar, hydrogen, battery recycling and electrolysis-based green hydrogen.

End-to-end test for AI data centers: system-level power architecture validation, high-voltage power, efficiency and transient analysis, plus signal and power integrity at compute and board level.